Flat top bracket (industrial use)
Flat roof brackets installed on the roofs of buildings, apartments, school buildings, etc. As the traditional construction method, foundation construction method and anchor bolt drive are the mainstream, but TMM's "flat roof base (industrial)" adopts the construction method without foundation and anchor rod. Therefore, there is no risk of rainwater leakage without damaging the building. This product comes with a 10-year warranty.
产品详情
1
It can handle wind speeds of 40 m/s and snow loads up to 70 cm. Comply with the design standard "JIS C 8955-2017".
2
Construction is just assembly and installation.You can use an elevator because it is made of lightweight aluminum and can be moved onto the roof. No maintenance is required, and the construction time is reduced by 50% to 75% compared with conventional construction methods (user evaluation results).
3
In addition to wind pressure fixation (verified by wind tunnel experiments) and wire fixation, the gantry is also fixed with strong butyl tape. By covering all the front, back and sides of the solar cell module with galvanized steel sheet, the wind blowing to the back is shut off.Its characteristic is that the solar cell module does not generate buoyancy and only applies a load toward the roof surface.